My print is not sticking to the plate

If your prints are not sticking to the build plate while printing, then this could be due to a couple of things.

Check list:

1. Make sure the build plate is clean before any print. We recommend cleaning it after/before every print with isopropyl alcohol.
2. Clean the outside of the nozzle from any filament.
3. Re-do the z-calibration. The nozzle might be calibrated a bit to far away from the build plate.
4. Is cold air hitting the print? If so, try to place the printer somewhere else. Wind/cold air can make the filament settle/dry in a way that will make the print pull itself together, which can warp and lift the print.